What should I use to mount my SV9, DiaMon, or CCM?
The small size, light weight, and low profile of the SV9, DiaMon, and CCM makes them perfect for mounting on a ceiling or wall.
Ceiling Mount:
If you want to mount your SV9, DiaMon, or CCM from a ceiling, we are developing a ceiling mount kit for this purpose. Check back soon for more info!
Wall Mounting:
If you want to mount your SV9, DiaMon, or CCM from a wall, there are three options we recommend: The K&M 24110, the K&M 24120, and the K&M 24169. All three of the wall mounts have a ring-lock pole that slots into the pole socket on the speaker, providing a secure and rattle-free attachment point.
The K&M 24110 puts the boxed at a fixed angle from the wall (so it cannot turn left or right without rotating the speaker in the socket. This is a good option if you are trying to fire the speaker perpendicular from the wall. It provides an adjustable downtilt from 0 to -22 degrees. It also comes in white (See variant US-24110-000-557)!
The K&M 24120 is similar to the 24110, in that it provides a 0 to -22 degree downtilt, but it also has the ability to continuously swing horizontally 180 degrees left to right. This is a good option if one needs to face the speaker left or right.
The K&M 21469 is more limited in its downtilt range than the 24110 and 24120 (it has only three steps of downtilt: 0, -12.5 degrees, and -25 degrees). However it provides a continuously adjustable horizontal swivel of 120 degrees, which is somewhere between the 24110 and 24120. It also is a lower profile mount which makes it a good option if you want a more discreet look or it needs to go in a tighter space.
See Also:
Related Articles
Rigging and Flying Instructions for BASSBOSS Loudspeakers
Caution: This article describes the best practices for flying BASSBOSS products. Note that not all models include flypoints - models such as the DJ18S without flypoints are not intended to be flown. Be sure to follow all relevant safety guidelines in ...CCM presets take a long time to change?
Q: CCM presets take a long time to change? Please check the ControlBASS page for firmware updates to the CCM-MK3 bassboss.com/software The presets within the CCM are very different, specifically between 2 and 3, between 4 and 5 and between 6 and 7. ...Why is the sustained and max SPL so different on the DiaMon?
Q: Looking at the specs of the diamon 112 it shows the max sustained spl is 123 and the max output is 133db. I would have thought 6db down from max would put the sustained output around 127db. Is this box capable of that output at all or really maxes ...Video | What speakers can I use on a 20 amp circuit?
Join David Lee, the designer behind BASSBOSS, as he introduces 'BASSBOSS Subs and Tops for A 20 Amp Circuit,' a comprehensive overview of different BASSBOSS systems suitable for operation on a 20 amp circuit. Hi there. I'm David Lee from Bassboss, ...Should I use end fire or cardioid?
Q: Should I use end fire or cardioid? Cardioid has better rear rejection, but at the expense of SPL and impact. Since we're almost always looking for max impact, we nearly always aim for end fire. Is this accurate? A: That’s technically accurate, but ...