Rewiring Pre-MK3 Subwoofer

Video | Rewiring Pre-MK3 Subwoofer

David Lee demonstrates how to rewire a sub amp after replacement or repair.

See Also

  1. Video: Rewiring Pre-MK3 Top Amps
  2. Video: Removing Pre-MK3 Subwoofer Amps
  3. Video: Reinstalling Pre-MK3 Subwoofer Amps
  4. All Service Videos
    • Related Articles

    • Video | Rewiring BASSBOSS Pre-MK3 Tops

      David Lee shares how to rewire a pre-MK3 BASSBOSS top amplifier <br> See Also: Video: Rewiring BASSBOSS Pre-MK3 Sub Amps Video: Removing BASSBOSS Pre-MK3 Top Amps All Service Videos
    • I've got a flashing list on my Pre-MK3 Subwoofer. What does it mean?

      Error codes on the pre-MK3 models assist in the diagnosis of errors. There are a wide variety of codes which can tell you more about why your amp may not be creating sound. This applies to all TLL14-XXXXX serial numbers. A PDF of this information is ...
    • Video | Removing and Installing Pre-MK3 DSP

      David Lee shares how to remove and Install Pre-MK3 DSP. <br> See Also: Video: Removing a BASSBOSS Pre-MK3 Top Amplifier Assembly All Service Videos
    • Video | BASSBOSS Pre-MK3 sub amp removal

      David Lee shares how to remove BASSBOSS Pre-MK3 Sub Amp. Step by step instructions are below. Subs Amp Removal: There are 12 Allen head screws around the perimeter of the heat sink: Remove the screws with a 3mm Allen wrench. Make sure the Allen ...
    • Video | Removing a BASSBOSS Pre-MK3 tops module

      David Lee shares information on removing a BASSBOSS Pre-MK3 top amp for replacement or repair. <br> See Also: Removing and Reinstalling a MK3 Amplifier Assembly Video: Packing a BASSBOSS Amp for Shipping Video: Removing a BASSBOSS Pre-MK3 Sub ...