Reinstalling BASSBOSS Pre-MK3 Sub Amps

Video | Reinstalling BASSBOSS Pre-MK3 Sub Amps - Full Process

David Lee shares how to reinstall and rewire a sub amp after replacement or repair. 




    • Related Articles

    • Video | BASSBOSS Pre-MK3 sub amp removal

      David Lee shares how to remove BASSBOSS Pre-MK3 Sub Amp. Step by step instructions are below. Bassboss Pre-MK3 Subwoofer Amplifier Removal Manual Subs Amp Removal: There are 12 Allen head screws around the perimeter of the heat sink: Remove the ...

    • Video | Rewiring BASSBOSS Pre-MK3 Tops

      David Lee shares how to rewire a pre-MK3 BASSBOSS top amplifier

    • Video | Removing a BASSBOSS Pre-MK3 tops module

      David Lee shares information on removing a BASSBOSS Pre-MK3 top amp for replacement or repair.

    • BASSBOSS Pre-MK3 top amp removal

      Tops Amp Removal: There are 8 Allen head screws (10 on AT312 and MFLA) around the perimeter of the heat sink. Pre-2021 models have button-head screws that require a 3mm Allen key. Later models have socket-head bolts that require a 4mm Allen key. ...

    • How do I know when my sub is peaking (Pre-MK3)?

      Q: Is there a way to tell when my pre MK3 BASSBOSS subwoofer is being pushed too hard or peaking? There are multiple, redundant stages of limiting in the processing and the amplifier. The amp won't clip. This means you don't have to worry about ...