Removing a BASSBOSS Pre-MK3 tops module

Video | Removing a BASSBOSS Pre-MK3 tops module

David Lee shares information on removing a BASSBOSS Pre-MK3 top amp for replacement or repair.

See Also:

    • Related Articles

    • BASSBOSS Pre-MK3 top amp removal

      Tops Amp Removal: You can also see the video here: https://help.bassboss.com/portal/en/kb/articles/removing-a-bassboss-pre-mk3-tops-module There are 8 Allen head screws (10 on AT312 and MFLA) around the perimeter of the heat sink. Pre-2021 models ...
    • Video | Rewiring BASSBOSS Pre-MK3 Tops

      David Lee shares how to rewire a pre-MK3 BASSBOSS top amplifier <br> See Also: Video: Rewiring BASSBOSS Pre-MK3 Sub Amps Video: Removing BASSBOSS Pre-MK3 Top Amps All Service Videos
    • Video | BASSBOSS Pre-MK3 sub amp removal

      David Lee shares how to remove BASSBOSS Pre-MK3 Sub Amp. Step by step instructions are below. Subs Amp Removal: There are 12 Allen head screws around the perimeter of the heat sink: Remove the screws with a 3mm Allen wrench. Make sure the Allen ...
    • Video | Packing a BASSBOSS Amp

      David Lee shares information on packaging an amp prior to shipping. <br> See Also: Removing and Reinstalling a MK3 Amplifier Assembly Video: Removing a BASSBOSS Pre-MK3 Top Amplifier Assembly Video: Removing a BASSBOSS Pre-MK3 ...
    • Video | Removing and Installing Pre-MK3 DSP

      David Lee shares how to remove and Install Pre-MK3 DSP. <br> See Also: Video: Removing a BASSBOSS Pre-MK3 Top Amplifier Assembly All Service Videos