Rewiring BASSBOSS Pre-MK3 Tops

Video | Rewiring BASSBOSS Pre-MK3 Tops

David Lee shares how to rewire a pre-MK3 BASSBOSS top amplifier


    • Related Articles

    • Video | Removing a BASSBOSS Pre-MK3 tops module

      David Lee shares information on removing a BASSBOSS Pre-MK3 top amp for replacement or repair.

    • Video | BASSBOSS Pre-MK3 sub amp removal

      David Lee shares how to remove BASSBOSS Pre-MK3 Sub Amp. Step by step instructions are below. Bassboss Pre-MK3 Subwoofer Amplifier Removal Manual Subs Amp Removal: There are 12 Allen head screws around the perimeter of the heat sink: Remove the ...

    • Video | Rewiring Pre-MK3 Subwoofer

      David Lee demonstrates how to rewire a sub amp after replacement or repair.

    • BASSBOSS Pre-MK3 top amp removal

      Tops Amp Removal: There are 8 Allen head screws (10 on AT312 and MFLA) around the perimeter of the heat sink. Pre-2021 models have button-head screws that require a 3mm Allen key. Later models have socket-head bolts that require a 4mm Allen key. ...

    • Which high-pass filter should I choose when combining tops and subs?

      Any combination of BASSBOSS subs and/or tops are pre-aligned. Different settings are meant to adjust the relative balance of highs to lows, but no adjustment to crossover settings are required regardless of chosen preset.