Welcome to the Knowledge BASS!

• Popular Articles

• Best power strip option for BASSBOSS subs?

  Q: From my understanding, it's best not to use a power conditioner for the BASSBOSS subs and tops. What would be an appropriate power strip option to connect power for BASSBOSS? Would a Furman SS-6B Surge Block be okay? I don't see that it says it's ...

• Why aren't there digital inputs on BASSBOSS gear?

  Q - We have the ability to run completely digital thru and out out DJ gear, wouldn't make sense to have a digital in on the BB amps? The DSP has to convert the analogue to digital and back to analogue, correct? Is there noticeable loss in the DSP ...

• Is there a point in cardioid for just 2 boxes?

  In open space, two boxes in normal mode will provide more output up front than if one of them were in cardioid BUT if a reflection from a wall behind the subs was to cause a reflection that cancelled the primary output of the two subs, then placing ...

• My bass sounds too heavy on some songs and too light on others. What do I do?

  All of our gear is full processed to provide a very level and consistent sound across the frequency spectrum there are designed to cover. Because of this, our gear illuminates the quality or lack of track quality in a very apparent way. Considering ...

• Video | Remove a BASSBOSS grille and driver

  David Lee shares best practices for removing grilles and drivers. <br> See Also: Video: Working with Fasteners Video: Inspecting a BASSBOSS Driver Video: Packing a BASSBOSS Driver All Service Videos

• Recent Articles

• What size/weight of light can fit on top of the Sublim8?

  In addition to being an all-in-one column speaker system, the Sublim8 also doubles as a lighting tower, complete with a PowerCON True1 power output on top of the unit. This was designed to simplify the setup of many production companies and mobile ...

• Getting the most out of your BASSBOSS speakers

  This article contains some tips and tricks for getting the best performance out of your BASSBOSS loudspeakers Input Sensitivity: The input sensitivity on the MK3 line of speakers is lower than what many are used to - this was a deliberate choice to ...

• Which Poles and Tripods do you recommend for BASSBOSS Loudspeakers?

  While there are a variety of different options for mounting your BASSBOSS Loudspeakers, the vast majority of mobile users place their subs on the ground while putting their tops on a tripod or sub pole. The benefit of this configuration is you get ...

• Installing a Replacement Diaphragm

  What you will need Philips-head screwdriver H3 (3mm) Hex Tool H5 (5mm) Hex Tool Steps Use a Philips-head screwdriver to remove the grille screws; set the grille to the side Use an H5 (5mm) Hex Tool to remove the driver bolts and gently lift the ...

• How to install and use a Driver Test settings file

  In the process of debugging your MK3 BASSBOSS Loudspeaker, we may ask you to load a "Driver Test" file to ensure both woofers are receiving signal and working properly. This document contains instructions on how to install and perform the test. Steps ...