BASSBOSS | Service Videos | Knowledge BASS

Service Videos
Video | Packing a BASSBOSS Driver
David Lee shares information on packing a sub amp for replacement or repair. See Also: Video: Grille and Driver Removal Video: Inspecting a BASSBOSS Driver All Service Videos
Video | Rewiring Pre-MK3 Subwoofer
David Lee demonstrates how to rewire a sub amp after replacement or repair. &amp;lt;br&amp;gt; See Also Video: Rewiring Pre-MK3 Top Amps Video: Removing Pre-MK3 Subwoofer Amps Video: Reinstalling Pre-MK3 Subwoofer Amps All Service Videos
Video | All Service Videos
Service Videos - Your Guide to BASSBOSS Repairs Inspecting a Driver Grille and Driver Removal Removing Pre-MK3 Top Amps Removing Pre-MK3 Sub Amps Packing a Driver for Shipping Packing an Amp for Shipping Removing/Installing Pre-MK3 DSPs Reinstalling ...
Video | Reinstalling BASSBOSS Pre-MK3 Sub Amps - Full Process
David Lee shares how to reinstall and rewire a sub amp after replacement or repair. See Also: Video: Removing a BASSBOSS Pre-MK3 Top Amplifier Assembly Video: Reinstalling a BASSBOSS Pre-MK3 Sub Amp Video: Removing a BASSBOSS Pre-MK3 Top ...
Video | Packing a BASSBOSS Amp
David Lee shares information on packaging an amp prior to shipping. &amp;lt;br&amp;gt; See Also: Removing and Reinstalling a MK3 Amplifier Assembly Video: Removing a BASSBOSS Pre-MK3 Top Amplifier Assembly Video: Removing a BASSBOSS Pre-MK3 ...
Video | Remove a BASSBOSS grille and driver
David Lee shares best practices for removing grilles and drivers. &lt;br&gt; See Also: Video: Working with Fasteners Video: Inspecting a BASSBOSS Driver Video: Packing a BASSBOSS Driver All Service Videos
Video | Working with BASSBOSS fasteners
David Lee shares how to work with fasteners during the replacement of components. See Also: Video: Grille and Driver Removal All Service Videos
Video | Making an air-tight seal for your BASSBOSS Pre-MK3 amp
David Lee shares best practices for working with gasket tape. See Also: Video: Removing a BASSBOSS Pre-MK3 Sub Amplifier Assembly Video: Reinstalling a BASSBOSS Pre-MK3 Sub Amplifier Assembly Video: Removing a BASSBOSS Pre-MK3 Top ...
Video | Removing a BASSBOSS Pre-MK3 tops module
David Lee shares information on removing a BASSBOSS Pre-MK3 top amp for replacement or repair. See Also: Removing and Reinstalling a MK3 Amplifier Assembly Video: Packing a BASSBOSS Amp for Shipping Video: Removing a BASSBOSS Pre-MK3 Sub ...
Video | Inspecting a BASSBOSS driver
David Lee explains how to Inspect a BASSBOSS Driver. &lt;br&gt; See Also: Video: Grille and Driver Removal Video: Packing a BASSBOSS Driver All Service Videos
Video | BASSBOSS Pre-MK3 sub amp removal
David Lee shares how to remove BASSBOSS Pre-MK3 Sub Amp. Step by step instructions are below. Subs Amp Removal: There are 12 Allen head screws around the perimeter of the heat sink: Remove the screws with a 3mm Allen wrench. Make sure the Allen ...
Video | Removing and Installing Pre-MK3 DSP
David Lee shares how to remove and Install Pre-MK3 DSP. See Also: Video: Removing a BASSBOSS Pre-MK3 Top Amplifier Assembly All Service Videos
Video | How to re-crimp BASSBOSS wires
David Lee shares how to re-crimp BASSBOSS wires. See Also: Video: Rewiring a Pre-MK3 Top Amp Video: Rewiring a Pre-MK3 Sub Amp Video: Reinstalling a BASSBOSS Pre-MK3 Sub Amp All Service Videos
Video | Rewiring BASSBOSS Pre-MK3 Tops
David Lee shares how to rewire a pre-MK3 BASSBOSS top amplifier See Also: Video: Rewiring BASSBOSS Pre-MK3 Sub Amps Video: Removing BASSBOSS Pre-MK3 Top Amps All Service Videos

Popular Articles
Best power strip option for BASSBOSS subs?
Q: From my understanding, it's best not to use a power conditioner for the BASSBOSS subs and tops. What would be an appropriate power strip option to connect power for BASSBOSS? Would a Furman SS-6B Surge Block be okay? I don't see that it says it's ...
Why aren't there digital inputs on BASSBOSS gear?
Q - We have the ability to run completely digital thru and out out DJ gear, wouldn't make sense to have a digital in on the BB amps? The DSP has to convert the analogue to digital and back to analogue, correct? Is there noticeable loss in the DSP ...
Is there a point in cardioid for just 2 boxes?
In open space, two boxes in normal mode will provide more output up front than if one of them were in cardioid BUT if a reflection from a wall behind the subs was to cause a reflection that cancelled the primary output of the two subs, then placing ...
My bass sounds too heavy on some songs and too light on others. What do I do?
All of our gear is full processed to provide a very level and consistent sound across the frequency spectrum there are designed to cover. Because of this, our gear illuminates the quality or lack of track quality in a very apparent way. Considering ...
Video | Remove a BASSBOSS grille and driver
David Lee shares best practices for removing grilles and drivers. &lt;br&gt; See Also: Video: Working with Fasteners Video: Inspecting a BASSBOSS Driver Video: Packing a BASSBOSS Driver All Service Videos

Recent Articles
How to install and use a Driver Test settings file
In the process of debugging your MK3 BASSBOSS Loudspeaker, we may ask you to load a "Driver Test" file to ensure both woofers are receiving signal and working properly. This document contains instructions on how to install and perform the test. Steps ...
Which BASSBOSS Tops are right for me?
BASSBOSS creates a variety of different tops that differ in size and application. This article explains the philosophy behind each product to help you narrow down your choices and find a speaker that is right for you. Factors to Consider: Portability ...
CCM12-MK3 vs. DiaMon-MK3
The CCM12-MK3 and DiaMon-MK3 are very similar boxes that work great for monitor duty, as light mains, and as fills. They are both sealed enclosures that feature the same 12" Coaxial driver with 3" voice coils, and both have the same 1200W amplifier ...
What size generator do you recommend for BASSBOSS Products?
Quick Notes Be sure to follow all relevant safety protocols in your area. If you are unsure how to properly operate a generator, hire a qualified electrician We recommend an Inverter Generator because it provides a much more stable power source for ...
Rigging and Flying Instructions for BASSBOSS Loudspeakers
Caution: This article describes the best practices for flying BASSBOSS products. Note that not all models include flypoints - models such as the DJ18S without flypoints are not intended to be flown. Be sure to follow all relevant safety guidelines in ...

BASSBOSS | Service Videos | Knowledge BASS

Service Videos

Video | Packing a BASSBOSS Driver

Video | Rewiring Pre-MK3 Subwoofer

Video | All Service Videos

Video | Reinstalling BASSBOSS Pre-MK3 Sub Amps - Full Process

Video | Packing a BASSBOSS Amp

Video | Remove a BASSBOSS grille and driver

Video | Working with BASSBOSS fasteners

Video | Making an air-tight seal for your BASSBOSS Pre-MK3 amp

Video | Removing a BASSBOSS Pre-MK3 tops module

Video | Inspecting a BASSBOSS driver

Video | BASSBOSS Pre-MK3 sub amp removal

Video | Removing and Installing Pre-MK3 DSP

Video | How to re-crimp BASSBOSS wires

Video | Rewiring BASSBOSS Pre-MK3 Tops

Popular Articles

Best power strip option for BASSBOSS subs?

Why aren't there digital inputs on BASSBOSS gear?

Is there a point in cardioid for just 2 boxes?

My bass sounds too heavy on some songs and too light on others. What do I do?

Video | Remove a BASSBOSS grille and driver

Recent Articles

How to install and use a Driver Test settings file

Which BASSBOSS Tops are right for me?

CCM12-MK3 vs. DiaMon-MK3

What size generator do you recommend for BASSBOSS Products?

Rigging and Flying Instructions for BASSBOSS Loudspeakers