Connectors for BASSBOSS speakers

What types of connectors do BASSBOSS speakers use?

MK3 Speakers:

Signal: XLR in and Passthrough
Control: etherCON in and through (for daisy chaining)
Power*: powerCON to 3 prong Edison in and Passthrough

Pre-MK3 Speakers:

Signal: XLR in and Passthrough
Power*: powerCON to 3 prong Edison (Some with Passthrough)

*Passthrough power should not exceed circuit connected to. 2500W amps should only connect 2 per 20AMP Circuit, 4 per 40AMP, etc. Any improper load balancing could lead to blown circuits.


    • Related Articles

    • Video | What speakers can I use on a 20 amp circuit?

      Join David Lee, the designer behind BASSBOSS, as he introduces 'BASSBOSS Subs and Tops for A 20 Amp Circuit,' a comprehensive overview of different BASSBOSS systems suitable for operation on a 20 amp circuit. Hi there. I'm David Lee from Bassboss, ...

    • Why don't you make passive speakers?

      Q: Why do you not make passive speakers and subs. I have so many amps and would prefer using passive as I have all the amps, crossovers, cabling. I can't afford the active equipment. All BASSBOSS products are sold with amplification and processing. ...

    • Can I use BASSBOSS subwoofers with turntables?

      When turntables are used in conjunction with powerful subwoofers, significant steps need to be taken to stabilize and isolate the turntables. In the more recent decades, turntables have been largely replaced with digital media. This is because the ...

    • I'm using a non-BB top. Can I use filters via external processing with BASSBOSS subs?

      Q: I'm using a different brand of top with my BASSBOSS subs, and have 24dB/octave L/R filters set up between mains and subs, crossing over at 90Hz. I typically don’t put vocals, guitars, and other high-frequency instruments into the subs at all, ...

    • Purchasing powerCON cables to connect MK2 to MK3 units

      What powerCON pass-through connectors/jumpers do I use to connect MK2 & MK3 loudspeakers together? To buy replacement power cords for your BASSBOSS Gear, read this article. Here is a handy guide for using the powerCON power pass-through connection on ...