Does the speaker show limiting in the ControlBASS app?

Does the speaker show limiting in the ControlBASS app?

Q: Is there a way to know when the speaker is going into the limiter from the ControlBASS app? It would be great to know if the volume is hitting the limit instead of having to check behind the speakers for the green light. 

A: The LED on the back of the cabinet illuminates when the limiter is active. It comes on when the limiter is  reducing the level by 6dB or more.

The display in ControlBASS shows how much compression is happening in a continuous vertical graph. The output level is displayed vertically from the bottom up in the center of the display. Gain reduction is displayed from the top down, to the right of the output level meter.

    • Related Articles

    • Can I purchase speaker boxes only, or with no amplification?

      Q: I'd like to buy just BASSBOSS speaker cabinets, or with drivers and use my own amplification. Do you sell only cabinets? BASSBOSS products are sold exclusively powered and processed. We offer both in-cabinet and rack amplification, but our ...

    • Video | Why Watts Don't Matter - The Truth about Speaker Amplification

      At BASSBOSS, we've long needed clarification on the speaker industry's overemphasis on watts as the primary indicator of a loudspeaker's performance. As the designers and innovators behind our powerful audio systems, we believe it's time to challenge ...

    • What speaker poles does BASSBOSS recommend?

      We recommend the following poles for your BASSBOSS System. These are available at many online retailers. K&M makes the most reliable and professional poles we've found! They offer a 5-year warranty with a 10-year guarantee of availability for most ...

    • Replacement Speaker Pole Mount for MK2 Models, Subs and Tops

      Need to replace the speaker pole mount in a BASSBOSS MK2 model product, sub or top? We recommend the 2 3/8" High Black Heavy Duty Top Hat for 1 3/8" Poles from Penn Elcom. https://www.penn-elcom.com/m1553-60 1 3/16" Long Black High Tensile Socket ...

    • ControlBASS and MK3 integration with pre-MK3 cabinets

      Q: I have a question regarding the ControlBASS software and potential integrations with older models. I have the SSP118 MK II's. If I were to purchase an MK3 version, could I use the XLR output from that to feed the MK II the same signal? Or would ...