Side pull anchors for horizontal installation of AT212 and AT312 cabinets
Looking for hardware to horizontally fly AT212 and AT312 cabinets?
- M10x30mm - 4pcs (2 in the top, 2 in the bottom)
- Hanger Climbing Anchor - 4pcs (2 in the top, 2 in the bottom)
Related Articles
Why doesn't the SSP218 cabinet have feet on the side?
Q: I see that the ZV28 has feet on the side. Why doesn't the SSP218 cabinet have feet on the side? A: The SSP218 cabinet has been in production since 2008, and was designed for large scale production work. There were design decisions that were made ...MK3 Cabinets Not Recognized in ControlBASS
If your MK3 Cabinets are not recognized in ControlBASS: Check whether the LAN Link LED is lit. If the LAN link LED is not lit, possible causes for a lack of connection are: The physical connection is bad due to a dirty or damaged connector, Check the ...Video | Vertical or horizontal subwoofer configurations
In this video presentation, we delve into a detailed analysis of the various factors influencing subwoofer positioning, carefully examining the advantages and disadvantages associated with each orientation option. Dive deep into the realm of ...Should I stack my subs or have them side by side?
The dimensions of the radiating area of your subwoofer(s) determine the frequency range of their directivity. It's often said that bass is omnidirectional, however that's only true to for wavelengths longer than the height and/or width of your ...Video | Exploring the DV12-MK3’s 120° horizontal coverage
Discover what sets the DV12 apart from ordinary speakers in this insightful discussion. From its unique horn design to its 120-degree horizontal coverage, this video unveils the secrets behind the DV12's exceptional sound performance.