How do I register my BASSBOSS gear?

• Related Articles

• I'm using a non-BB top. Can I use filters via external processing with BASSBOSS subs?

  Q: I'm using a different brand of top with my BASSBOSS subs, and have 24dB/octave L/R filters set up between mains and subs, crossing over at 90Hz. I typically don’t put vocals, guitars, and other high-frequency instruments into the subs at all, ...

• Video | Reinstalling BASSBOSS Pre-MK3 Sub Amps - Full Process

  David Lee shares how to reinstall and rewire a sub amp after replacement or repair. <br> See Also: Video: Removing a BASSBOSS Pre-MK3 Top Amplifier Assembly Video: Reinstalling a BASSBOSS Pre-MK3 Sub Amp Video: Removing a BASSBOSS Pre-MK3 Top ...

• BASSBOSS Pre-MK3 top amp removal

  Tops Amp Removal: You can also see the video here: https://help.bassboss.com/portal/en/kb/articles/removing-a-bassboss-pre-mk3-tops-module There are 8 Allen head screws (10 on AT312 and MFLA) around the perimeter of the heat sink. Pre-2021 models ...

• Video | What is the best subwoofer to top ratio?

  David Lee from BASSBOSS discusses the optimal ratio of subwoofers (subs) to top speakers (tops) in this video: Hi, I'm David Lee from BASSBOSS. And we get asked, what's the right ratio of subs to tops? Now that all depends on the tops themselves and ...

• Video | BASSBOSS Pre-MK3 sub amp removal

  David Lee shares how to remove BASSBOSS Pre-MK3 Sub Amp. Step by step instructions are below. Subs Amp Removal: There are 12 Allen head screws around the perimeter of the heat sink: Remove the screws with a 3mm Allen wrench. Make sure the Allen ...