David Lee's Philosophy | |
Understanding Input Sensitivity | |
Why You Need Deep BASS Pt. 1 | |
Why You Need Deep BASS Pt. 2 | |
Power Requirements | |
Who is David Lee? | |
BASSBOSS Subs and Tops for A 20 Amp Circuit | |
How to Best Distribute Your Equipment Load on A 20 Amp Circuit | |
Mastering Headroom for Pro Audio: Achieve Clean Sound at Your Events | |
Finding Balance: Achieving the Perfect Subwoofers to Tops Ratio | |
Performing with Subwoofers On Carts | |
A Guide to Choosing the Best Generators | |
Tackling Ground Loop Noise in Your Audio System | |
Vertical vs. Horizontal - Advantages and Disadvantages | |
Best BASSBOSS Subwoofer Cleaning Products | |
Choosing between 2 Way and 3 Way Speakers: Pros and Cons | |
Advantages and Disadvantages of Using a Mixer | |
Fine-Tuning Your Audio Setup: How to Delay Speakers | |
Inside the MK3 Upgrade: MKII v. MK3 | |
BASSBOSS Pre-MK3 sub amp removal | |
One person stacking of ZV28 (and all BASSBOSS) subwoofers | |
VS21 subwoofer moving and stacking techniques | |
Gain Structure/Input Sensitivity with Samia Scoda | |
Packing a BASSBOSS Amp | |
How to remove your BASSBOSS loudspeaker grill and driver | |
Working with BASSBOSS fasteners | |
Making an air-tight seal for your BASSBOSS Pre-MK3 amp | |
Removing a BASSBOSS Pre-MK3 tops module | |
Inspecting a BASSBOSS driver | |
Removing and Installing Pre-MK3 DSP | |
How to re-crimp BASSBOSS wires | |
Rewiring BASSBOSS Pre-MK3 Tops | |
What is the best subwoofer to top ratio? | |
What is the "why" of BASSBOSS? | |
Can I use my subwoofers on carts? | |
Do I need to break in my speakers? | |
Why Watts Don't Matter - The Truth about Speaker Power |