BASSBOSS Knowledge BASS and Service Portal

Join Us!

Want to ask a question? Join the Community!


    • Popular Articles

    • Why are the frequency responses lower for pairs of subwoofers than single subs?

      If you have a loudspeaker that’s operating at its bottom limit, and then you supply another box to assist that first box, collectively their bottom limit extends lower. That effect is true for any subwoofer and subwoofer pair. When you put multiple ...
    • How to Read the MK3 Preset Names

      Due to the fact that the software doesn’t allow room for a full description of all the filter parameters, the information displayed is confined to the elements that are different rather than including all the parameters. All the high-pass filters are ...
    • How do I remove drivers/swap amps/send in my BASSBOSS components for service?

      We try to make products that never fail. That said, nothing in this world is perfect! If you need information on self-servicing your BASSBOSS product, we have a whole series of videos with David Lee to help. Please check out our Service Videos page ...
    • Below 20Hz - Does any music actually use it?

      Q: I see a lot of subs marketing below 20Hz but there is very little musical or movie information there correct? Your subs roll off at 27Hz or so. Is that due to driver selection or DSP limitation ? What dB are your VS21 or DJ118 outputting below ...
    • Best power strip option for BASSBOSS subs?

      Q: From my understanding, it's best not to use a power conditioner for the BASSBOSS subs and tops. What would be an appropriate power strip option to connect power for BASSBOSS? Would a Furman SS-6B Surge Block be okay? I don't see that it says it's ...
    • Recent Articles

    • Does the 120º dispersion of the DV12 cause interference or comb filtering if the speakers are too close together?

      Q: What is the minimum width the DV12 speakers should be distanced from one another, and will being too close cause interference? A: The minimum width between a left and a right speaker is, in effect, the width between two ears, like headphones. The ...
    • I'm using a non-BB top. Can I use filters via external processing with BASSBOSS subs?

      Q: I'm using a different brand of top with my BASSBOSS subs, and have 24dB/octave L/R filters set up between mains and subs, crossing over at 90Hz. I typically don’t put vocals, guitars, and other high-frequency instruments into the subs at all, ...
    • Can I add a small mixer to my signal chain?

      It's never a good idea to add a small, cheap mixer between a DJ controller and a BASSBOSS system. It's a low-quality piece of equipment compared to a high-quality controller and your subwoofer and tops, and compromises your sound quality. In short, ...
    • BASSBOSS EASE GLL Files

      BASSBOSS has the following models available for EASE GLL Files AT212-MK3 AT312-MK3 DiaMon-MK3 SSP118-MK3 VS21-MK3 ZV28-MK3 You can download them individually, or as a ZIP file below. More information on EASE can be found here.
    • Is the MK2 line louder than the MK3?

      Q: My MK2 cab seems louder than my MK3 version. What are the MK3 vs. MK2 input sensitivity and output levels differences? The input sensitivity of the MK2 amplifiers and MK3 amplifiers of some models may be different. This doesn’t mean the MK2 are ...